Skip to main content

Accurate Network

Home > Blog Details

CCTV Network Security: How to Stop Your Cameras Becoming a Back Door

CCTV cameras and NVRs are often the least protected devices on a business network. Seven practical steps to secure them.

CCTV Network Security: How to Stop Your Cameras Becoming a Back Door

Almost every factory, shop and office in Surat has CCTV. Cameras and NVRs/DVRs are usually installed once by a vendor and then forgotten. Because they are always on, connected to the network and often reachable from the internet, they are a common way for attackers to get in or for footage to leak.

1. Change every default password

Many recorders and cameras are still running the password set at installation, sometimes the manufacturer default. Set a strong, unique admin password and keep it with your IT records, not on a sticker on the NVR.

2. Update the firmware

Camera and NVR makers release firmware updates to fix security holes. Check the firmware version on your recorder and cameras, and update them from the manufacturer’s official source.

3. Stop exposing the NVR directly to the internet

Port forwarding so that the owner can watch cameras on a phone is convenient, but it puts the recorder directly on the internet. Use a VPN for remote viewing, or the manufacturer’s secure cloud service with strong passwords and two-step login where available.

4. Put cameras on a separate network

Keep CCTV on its own network zone or VLAN, separated from office computers, servers and Tally or ERP systems. If a camera is compromised, the attacker cannot reach your business data.

5. Control who can view and download footage

Give each person their own login with only the access they need. Remove access for former staff and vendors, and avoid sharing one admin account across the company.

6. Protect the recorder physically

Keep the NVR in a locked rack or room with a UPS. A recorder sitting on an open desk can be switched off, stolen or reset, taking the evidence with it.

7. Check recording and storage regularly

Make sure every camera is actually recording, the time and date are correct, and the hard disks are healthy. Many businesses only find out a camera stopped weeks ago when they need the footage.

Next step

CCTV security is part of good network management and cybersecurity. If you run a factory, also see our firewall checklist for GIDC factories, or ask for a Free IT Health Check.

Mayur Surati, Founder of Accurate Network

Written by

Mayur Surati

Founder & IT Business Consultant

Helping businesses build reliable, secure and proactively managed IT environments through long-term technology partnerships.